Bumper- Rear

• Ambush Series Rear Bumper

See All

• Smitty Bilt Apollo JL/JT Rear Bumper

See All

• Tubular w/Sheet Metal Design
• Keeps Bumper Weight To a Minimum
• Provides Superior Strength Over OEM Rear Bumper
• Tall Corners Keep The Lines Of The Vehicle

See All

• Mount Kit Sold Separately
• Popular Diamond Tread Design
• Full Size Tongue Weight of 800 lbs. And 8000 lbs. Trailer Weight
• Downsize and Compact Are 350/3500 lb. Weights
• V5 Tested Certified To SAE J684

See All

• Built In Step Pockets For Easy Bed Access
• OE Sensor Compatible

See All

• Black Powder Coat
• Manufactured From High Quality Cold Roll Steel
• Precision Laser Cut
• CNC Press Brake Formed
• Works With Most Winches On The Market
• Includes .75 in. Steel Shackles With Black Isolators
• Includes LED Cube Lights

See All

• Protects Vehicle From Damage Against Wildlife And Road Debris
• Provides Added Safety To Driver And Vehicle
• Heavy Duty Diamond Plate Steel
• Honeycomb Mesh Protects Grille/Gives Maximum Airflow
• 1.5 in. Headlight Protection Tubes
• 2 in. Full Wraparound Wings Ties Into Bumper
• Provisions For Factory Parking Sensors
• 2 in. Receiver Hitch/Heavy Duty 9500 lbs. Bow Shackle Mounts
• Compatible For Factory Fog Lamps Or LED Post Mount Lights
• Custom Die Cast Riveted Logo Badge
• Mounting Provisions For License Plate
• Hardware Mounting Brackets Included

See All

• 7 Gauge Steel
• 1-Piece Fully Welded Construction
• 1 in. Thick HS Shackle Mounts
• Two Flush Mount Led Lights Included
• License Plate Illumination Lights Included
• Laser-Cut HDX Logo On Ends
• Application Specific Designs
• Mounting Brackets Included
• Available With Or Without Provision For Back-Up Sensors
• Available In Textured Black Finish Or Raw

See All

• Constructed Of 11-Gauge Steel
• Recessed Pod Light Cavities - Lights Sold Separately
• High-Strength 1 in. D-Ring Tabs
• Durable High-Quality Black Powder-Coat
• License Plate Relocation Bracket And Light Included
• Parking Sensor Compatible
• Limited Lifetime Warranty

See All

• Direct Fit
• Manufactured From 3/16 and 1/4 Cold Roll Steel
• Solid Mount D-Rings Welded On The Inside And Out
• Two Stage Matte Black Finish Powder Coat Finish - 5 Year Limited Warranty
• Smittybilt Advantage Warranty

See All

• M1A2 Modular Rear Bumper For 14-18 Chevy Silverado

See All

• OEM Style Steel Rear Bumper

See All

• Mount Kit Included
• 2 In. Diameter Tube Frame
• Optional Class III/IV Hitch Available. Sold Separately
• Retractable License Plate Holder Conceals Receiver Hitch
• Equipped With Mount Points For Optional Auxiliary Lights
• Available For Vehicles With Or Without Backup Sensors
• Bolt-On Installation; No Drilling Required

See All

• Signature Series Step Pad
• Complete Assembly
• Molded Polymer Step Pads
• V5 certified
• Interchangeable Components
• 3 Year Warranty

See All

• Increases Ground Clearance And Angle Of Approach
• Constructed Of 10 Gauge Steel For Strength And Style
• Compatible For Blind Spot Monitors And Parking Sensors
• Accommodate For Oem Hitch And Led Back Up Lights
• Configured To Accept 2 Fm6 Led Flush Mount
• Custom Laser-Cut Westin Logo
• Hardware And Mounting Brackets Included
• Bolt-On Installation - No Drilling Required

See All

• Rear Bumper

See All

• 3/16 Inch Steel Plate Construction
• Bolt On Installation Includes Hardware
• Dual Shackle Plates For D-Rings Tie To Frame Rails
• License Plate Pocket Reuse OEM Lights
• Dual Process Black Powder Coat Finish
• Retain OEM Tow Hitch
• Can Mount TN-5293 Swing Arm Tire Carrier

See All

• 3/16 in. Cold Rolled Steel Plate Construction
• Dual Shackle Plates Tie To Frame Brackets
• Will Allow For TC 5293 Swing Arm
• Stronger Then OEM Bumper
• Dual Process Black Powder Coat Finish
• Easy At Home Installation With Only Hand Tools
• Return OEM Tow Hitch

See All

• Direct Fit
• Dual Gloss Black Powdercoat Painted Finish
• Dense Zinc Treated Undercoating
• Expertly Robotically Welded
• Bumper Bolts Directly On To Vehicle
• 2 in. Receiver Hitch
• 5 Year Limited Warranty

See All

• 3/16 in. Steel Plate
• Bumper Step For JT-2965
• Bolt-On Design
• Uses Factory Frame Mounting Holes For Extra Support
• Optional Bed Protector JT-5101
• Two-Stage Light Texture Finish In Black
• 3 Year Finish/Limited Lifetime Warranty

See All

• Rear Bumper Step Pad

See All

• Rear Steel Bumper

See All

• 7 Gauge Steel
• 1-Piece Fully Welded Construction
• 1 in. Thick HD Shackle Mounts
• Two Flush Mount Led Lights Included
• Welded Hitch Receiver
• Laser-Cut Snyper Logo On Ends
• Mounting Brackets Mount Directly To Frame
• Textured Black Finish

See All

• With Receiver
• No D-Ring Mounts

See All

• Raised corners for better entry and exit under the most extreme conditions
• Accommodates 3X3 Cube Led Lights
• Integrated 3/4 in. D-Ring Mounts
• Class Iii Receiver Hitch
• Integrated Jack Points
• Perfect Mid Width Design

See All

• Direct Fit
• E-Coat Undercoated With Dual Stage Textured Black Powder Coat
• Heavy-Duty 1/4 in. Steel Plate Design
• Three Point Mounting System Supports Over-Sized Tires
• Special Lock Design Keeps Tire Carrier Secure While Off-Roading
• 5 Year Limited Warranty

See All

• New solid D-ring and jack point mount - welded on the inside and out!
• Aggressive design for with raised corners for better entry and exit angles for the most extreme conditions
• UHMW ;ultra-high-molecular-weight polyethylene to provide the ultimate protection for rock crawling
• Aux back up light cut out provided
• 3/16-inch cold rolled steel with two-stage textured matte black finish
• Powder coat finish 5 year limited warranty
• Smittybilt limited lifetime warranty
• Modular design; tire carrier can be added in the future.
• Class III hitch for true towing with towable d-ring

See All

• Direct Fit
• Black Powder Coat
• Dense Zinc Treated Undercoating
• Two Stage Textured Black Powder Coat Finish
• Expertly Robotically Welded
• Bumpers Bolt Directly To Your Vehicle
• Bumper Is 2 in.X.120 in. Wall
• 2 in. Receiver Rated Class III 9;000 LBS.

See All

• Not Vehicle Specific
• 3mm Deep Drawn Formed Steel
• Winch Compatible Up To 12K
• Includes Modular Wings With Light Provisions
• Integrated D-Ring and Lift Points
• Oe Fog Light Provision
• Integrated Overrider With 13 in. Lightbar Provision

See All

• Cold Rolled Brite Steel
• OE Style Steel Step Plate
• Molded Polymer Surface
• Mount Kit Sold Separately
• 3 Year Warranty

See All

• Functional Design
• Works With 2 in. Receiver Tow Hitch
• Contoured Corners
• Allows Clearance For Spare Tire
• Black Powdercoat Finish
• 3 Year Warranty

See All

• Cutouts and Mounting Tabs for OE Lights and Aftermarket LEDs
• Strong/ Lightweight And Rust-Free Hardened Aluminum Construction
• Textured Black Powder Coat Easily Hides Minor Scratches And Grime
• Center Cutout For Trailer Hitch Receiver Tube
• Pre-Existing Factory Mounting Points For No-Drill Bumper Install
• Front And Rear Bumpers Available
• Includes Center Section PN 2081001/ Corners PN 2081200
• Includes Brush Guard PN 2081205 And Mounting Hardware

See All

• Cutouts and Mounting Tabs for OE Lights and Aftermarket LEDs
• 3/16 in. Carbon Steel Construction For Maximum Strength
• Textured Black Powder Coat Easily Hides Minor Scratches And Grime
• Center Cutout For Trailer Hitch Receiver Tube
• Pre-Existing Factory Mounting Points For No-Drill Bumper Install
• Front And Rear Bumpers Available
• Includes Rear Center Section Only

See All

• LEDs Feature Waterproof Aluminum Housing And 50000-Hour Lifespan
• Flood Beam Pattern w/2200-Lumen Output Each
• Cutouts And Mounting Tabs Allow For OE Lights
• 3/16 in. Carbon Steel Construction For Maximum Strength
• Textured Black Powder Coat Easily Hides Minor Scratches And Grime
• Center Cutout For Trailer Hitch Receiver Tube
• Pre-Existing Factory Mounting Points For No-Drill Bumper Install
• Front And Rear Bumpers Available
• Includes Rear Center Section PN 2081020
• Includes Corners PN 2081222 And Mounting Hardware

See All

• Shackle Rating Of 12500 lbs. For Off-Road Purpose
• 1/4 in. Thick Sleeves Provide Reliable Anchoring Points
• Shackle Mounts Accept Pins Up To 7/8 in. In Diameter
• No-Drill Install Use Factory Mounting Points w/No Pump Relocation
• One-Piece Construction w/3/16 in. Thick/ All-Steel Plates
• Narrow Width And High Ground Clearance For Off-Road-Style Design
• Durable Carbide Black Powder Coat w/Rust-Resistant E-Coat Finish
• Center Cutout For Rear Mount Trailer Hitch Receiver Tube
• Includes Mounting Hardware And 3/8 in. Thick Brackets
• Includes Bull Bar And Mounting Hardware
• Bull Bar May Interfere w/Forward-Facing Cameras Or Sensors

See All

• RotoPax Mount

See All

• 3/16-Inch Plate Steel Construction
• Designed To Work With Factory Or Westin Hitches
• Integrated Recovery Shackle Mount Points
• Auxiliary Light Mount Points
• Rock Light Mount Points
• 2 Off-Road Jack Points
• No Drilling Required - Bolt On Installation
• Includes Bumper; Mounting Hardware And Install Instructions

See All

• Fits up to 37 in. tires
• Class III tow rated
• New cam-style pin adjustment
• Easy 2 finger opening latch
• Double catch latch eliminates accidental opening
• MOLLE Pals compatible to allow multiple pouch mounting configurations
• Stainless steel pivot washer for longer wear life
• 3rd brake light bracket included
• integrated gas can and jack mounts

See All

• Bolt-on design for XRC GEN2 bumpers
• Frame pivot point for added strength
• Tuned one-handed opening operation; tuned to factory tailgate
• CB and jack mounts and Roto Pax® gas can holder
• Manufactured from 3/16 in. cold rolled steel
• Two-stage textured matte black finish

See All

• Direct Fit
• 2 And 4-Door Models
• Two Stage Matte Black Textured Powder Coat Finish

See All