Bumper- Front

• Heavy Duty 3/16 Steel Construction Protects The Vehicles Vital Components And Add Strength
• Fully Compatible With OE Sensor Package Radius To Match OE Styling
• Winch Mount Compatible
• Light Mounts Included
• Provision For One 30 in. Light Bar-Single Or Double Row And Up To Four 2x2 Pod Lights
• D-Ring Mount Included

See All

• Ambush Series Front Bumper

See All

• Intercooler Shroud For Diesel Engines Only
• Easy Bolt On Installation
• Protects From Debris
• Two-Stage Light Texture Finished In Black

See All

• Smitty Bilt Apollo JL/JT Front Bumper

See All

• Two Piece Construction
• Tubular w/Sheet Metal Design
• Step Corners For Easy Bed Access
• Tail Corners Keep OE Vehicle Lines

See All

• 1/8 in. Thick Steel Plate
• ADD Aggressive Style w/o Weighing Down The Vehicle
• Bolt On Installation
• Non-Winch Capable
• OE Sensor Compatible
• Includes License Plate Bracket
• Light Fitment 20 in. Dual Row LED Middle/4 Cube LEDs

See All

• 1/8 in. Steel Plate With 1/4 in. Winch Plate For Strength
• 12000 lb. Winch Capacity
• OE Sensor Compatible
• Includes License Plate Bracket
• Light Fitment 30 in. Dual Row LED Middle And 4 Cube LEDs

See All

• 3/16 in. Steel Plate Construction
• Bolt On Design For All Body Armor JL Front Bumpers
• 20 in. Single Row Light Opening
• Two-Stage Light Texture Finish In Black

See All

• Kit Re-Uses The Factory Fog Lights

See All

• Integrated Winch Plate
• Single 2 Hoop With Two Light Tabs
• Skid Plate For Steering Box
• Reinforced Bumper Wings For Added Strength
• Dual Shackle Plates For D-Rings
• Fits TJ And YJ All Models
• Dual Process Black Textured Powder Coat

See All

• Gloss Black Powder Coat
• Front Bumper
• With Hoop
• No Drill Installation
• 5-Year Limited Warranty

See All

• Front Bumper

See All

• High Clearance Design
• Integrated Winch Plate
• 2 in.. Dia. Center Hoop With Light Tabs
• Dual Shackle Plates For D-Rings
• Dual Process Black Powder Coat Finish
• Light Mounting Holes On Bumper Wings

See All

• Black Powder Coat
• Manufactured From High Quality Cold Roll Steel
• Precision Laser Cut
• CNC Press Brake Formed
• Works With Most Winches On The Market
• Includes .75 in. Steel Shackles With Black Isolators
• Includes LED Cube Lights
• Light Bars Sold Separately

See All

• Protects Vehicle From Damage Against Wildlife And Road Debris
• Provides Added Safety To Driver And Vehicle
• Heavy Duty Diamond Plate Steel
• Honeycomb Mesh Protects Grille/Gives Maximum Airflow
• 1.5 in. Headlight Protection Tubes
• 2 in. Full Wraparound Wings Ties Into Bumper
• Provisions For Factory Parking Sensors
• 2 in. Receiver Hitch/Heavy Duty 9500 lbs. Bow Shackle Mounts
• Compatible For Factory Fog Lamps Or LED Post Mount Lights
• Custom Die Cast Riveted Logo Badge
• Mounting Provisions For License Plate
• Hardware Mounting Brackets Included

See All

• Made Of 7 Gauge Steel
• 1-Piece Welded Construction
• Fits Medium Frame 8000-12000 lbs. Winches [Up To 9.75 in. Tall]
• Fits Remote Solenoid Box Winches Only
• Pre-Drilled For Winch And Fairlead Mounting
• Laser-Cut Openings To Allow Engine Cooling
• Built To Receive [2] 10 in. Led Light Bars
• Optional Light Bar And Pre-Runner Bar Sold Separately
• 1 in. Thick HD Shackle Mounts
• Adj. Mounting Brackets Accommodate Led Lights 11-12.75 in. Long
• Application Specific Designs
• Available In Textured Black Finish Or Raw

See All

• X-treme-Built Front Bumpers
• 2X5X0.190 in. Wall Enclosed Rectangular Tube
• Use With Body Armor Winch Plate
• Manufactured In 54 in. Length
• 4-Mil Black Powder Coat Finish
• Shackle Mounts Welded Front And Rear Surfaces
• Steering Box Slid Plate And Light Tabs
• 2 in. Recovery Receiver Package/No Drill-Bolt

See All

• Increased Tire Clearance
• Low-Profile Bull Bar
• Constructed Of 11-Gauge Steel
• Recessed Pod Light Cavities - Lights Sold Separately
• Recessed 20 in. Light Bar Cavity - Light Sold Separately
• High-Strength 1 in. D-Ring Tabs
• Durable High-Quality Black Powder-Coat
• Parking Sensor Compatible
• Limited Lifetime Warranty

See All

• Tubular Front Bumper
• Significant Weight Savings Over Stock Front Bumper Beam
• Service replacement part for 2013 Boss 302S

See All

• Direct Fit
• M1 Truck Front Bumper
• Manufactured From 3/16 and 1/4 Cold Roll Steel
• Ultra Bright Driving And Fog Lights
• Solid Mount D-Rings - Welds On The Inside And Out
• Solid Plate Center Section That Wraps The Frame Horns And Lower Cross Member

See All

• M1A2 Modular Front Bumper For 14-18 Chevy Silverado

See All

• 7 Gauge Steel
• 1-Piece Fully Welded Construction
• Aggressive Chiseled Design
• Fits Most Medium Frame 8000-12000 lbs. Up To 10.25 in.
• Pre-Drilled For Winch And Fairlead Mounting
• Fits Most Flush Mount Auxiliary Lights
• 1 in. Thick HD Shackle Mounts
• Mounting Brackets Mount Directly To Frame
• Textured Black Finish

See All

• 7 Gauge Steel
• 1-Piece Fully Welded Construction
• Aggressive Chiseled Design
• Fits Most Medium Frame 8000-12000 lbs. Up To 10.25 in.
• Pre-Drilled For Winch And Fairlead Mounting
• Fits Most Flush Mount Auxiliary Lights
• 1 in. Thick HD Shackle Mounts
• Mounting Brackets Mount Directly To Frame
• Textured Black Finish

See All

• 7 Gauge Steel
• 1-Piece Fully Welded Construction
• Aggressive Chiseled Design
• Fits Most Medium Frame 8000-12000 lbs. Up To 10.25 in.
• Pre-Drilled For Winch And Fairlead Mounting
• Fits Most Flush Mount Auxiliary Lights
• 1 in. Thick HD Shackle Mounts
• Mounting Brackets Mount Directly To Frame
• Textured Black Finish
• 1 Year Finish Warranty
• Limited Lifetime Workmanship Warranty

See All

• Mount Kit Included
• 2 In. Diameter Tube Frame With 1.5 In. Diameter Center Tubes
• Integrated Mount For Two Single Or One Double Row 30 In. LED Bar
• Equipped With Mount Points For Optional Auxiliary Lighting
• Optional Outlaw Skid Plate Available. Sold Separately
• Optional Outlaw Led Light Kits Available. Sold Separately
• Round Led Light Kit w/Westin Auxiliary Lights Sold Separately
• Square Led Light Kit w/Hyper Auxiliary Lights Sold Separately

See All

• Lightweight Design Reduce Shipping Cost w/o Sacrificing Strength
• Increases Ground Clearance And Angle Of Approach
• Constructed Of 10 Gauge Steel For Strength And Style
• Mesh Screen Allows Maximum Air Flow To Intercooler/Radiator Area
• Has Provisions For Factory Sensors - On Some Applications
• 10 Gauge Steel Valance Included - On Some Applications
• Valance Features Laser-Cut Westin Logo
• Bolt On Skid Plate Available - Sold Separately
• Compatible For Factory Tow Hooks - On Some Applications
• Outrigger Brackets Support Wings Of Bumper For Maximum Strength
• Hardware And Mounting Brackets Included
• E-Coated Base Coat Provides Long Lasting Corrosion Protection

See All

• Low Profile Design
• The OEM Bumper That Fits Most 8000-12000 Lbs Winch Models
• Accommodates Recessed Hawse Fairlead For Maximize Approach Angle
• Constructed Of 10 Gauge Steel For Strength And Style
• Heavy-Duty 4 Gauge Winch Mount Center Section
• Features Large Winch Access Holes For Easier Operation
• Provides Two Recovery Points For Shackles
• Configured To Accept Most Single Row 20 in. Led Light Bars
• Available In Two Bull Bar Styles/Round And Angular
• Hardware And Mounting Brackets Included
• E-Coated Base Coat Provides Long Lasting Corrosion Protection
• Available In Textured Black Finish

See All

• Front Winch Bumper

See All

• No Receiver
• With D-Ring Mounts

See All

• 7 Gauge Steel
• 1-Piece Fully Welded Construction
• Fits Most Medium Frame 8000-12000 lbs.
• Mounting Brackets Mount Directly To Frame
• Available In Textured Black Finish

See All

• 7 Gauge Steel
• 1-Piece Fully Welded Construction
• Fits Most Medium Frame 8000-12000 lbs.
• Mounting Brackets Mount Directly To Frame
• Available In Textured Black Finish

See All

• 7 Gauge Steel
• 1-Piece Fully Welded Construction
• Fits Most Medium Frame 8000-12000 lbs.
• Mounting Brackets Mount Directly To Frame
• Available In Textured Black Finish

See All

• Raised corners for better entry and exit under the most extreme conditions
• Ability to retain factory fog lights
• Solid 3/4 in. D-ring mounts-welded on the inside and out
• Removable bull bar 1.75 in. .120 wall overrider and kickers
• Integrated Gen2 Light Mounting Tabs On The Bull Bar
• Integrated winch plate fits up to 12K LB winch;dual winch bolt pattern 4.5 in. x 10 in. and 4.5 in. x 6 in.
• Open top and side design fits virtually all winch sizes
• Unique triangulation anchor fastens to frame in multiple locations
• Perfect mid width ;57 in. design

See All

• Direct Fit
• Dual-Stage Black Textured Powder Coat Painted For Long Life
• 1/4 in. Steel Plate Design
• Zinc Undercoated
• Bumpers Bolt Directly To Your Vehicle
• Requires No Drilling Or Modifications
• 5-Year Limited Warranty

See All

• Direct Fit
• Textured Black Powder Coat
• Four Taps To Mount Lights
• Wide Opening Allows For Winch Installation
• 1/4 in. Thick Custom Mounting Brackets
• Welded D-Ring Tabs
• Durable 2 in.X.120 in. Wall Over Built
• Bumpers Bolt Directly To Your Vehicle
• Requires No Drilling Or Modifications
• 5-Year Limited Warranty

See All

• 2 And 4-Door Models
• Factory 10th Anniversary Rubicon lights will not fit
• New max solid D-ring and jack point mount - welded on the inside and out!
• Aggressive design for with raised corners for better entry and exit angles for the most extreme conditions
• Fender To Fender Protection

See All

• Not Vehicle Specific
• Aggressive; stubby bumper design can convert to full-protection bumper
• Deep draw press-formed 3mm cold rolled steel for strength and weight savings
• Bolt-on internal winch plate ;accommodates up to 12k with Integrated lift points and 7/8 in. D-rings mounts
• Removeable overrider can fit single row LED light bar
• heavy duty reinforced skid plate with added lower mounting support
• Provision for OE style fog lights *Excluding lights supplied tih metal Rubicon front bumpers
• Optional side wings ;76731; sold separately with mounts for 3x3 cube lights

See All

• Includes Scorpion 20 in. LED Single Row Light Bar
• Black Powder Coat
• Integrated .75 in. Thick Winch Plate
• Slim Sleek Design That Molds To The Factory Bumper
• Steel Construction
• Works With Most Winches On The Market

See All

• Functional Design
• Works With 2 in. Receiver Tow Hitch
• Contoured Corners
• Allows Clearance For Spare Tire
• Black Powdercoat Finish
• 3 Year Warranty

See All

• Modular Pieces Can Be Added Or Removed To Change The Look
• LEDs Feature Waterproof Aluminum Housing And 50000-Hour Lifespan
• Flood Beam Pattern w/2200-Lumen Output Each
• Cutouts And Mounting Tabs Allow For OE Lights
• Pre-Formed Slots On The Brush Guard Accept LED Lights On Top
• Brush Guard Also Adds Extra Protection For The Winch Housing
• 3/16 in. Carbon Steel Construction For Maximum Strength
• Textured Black Powder Coat Easily Hides Minor Scratches And Grime
• Pre-Drilled Holes For Anti-Rattle D-Rings PN 2081300
• 22-1/2 in. x 7-3/4 in. Winch Housing
• Pre-Existing Factory Mounting Points For No-Drill Bumper Install
• Front And Rear Bumpers Available

See All

• Modular Pieces Can Be Added Or Removed To Change The Look
• Cutouts and Mounting Tabs for OE Lights and Aftermarket LEDs
• 3/16 in. Carbon Steel Construction For Maximum Strength
• Textured Black Powder Coat Easily Hides Minor Scratches And Grime
• Pre-Drilled Holes For Anti-Rattle D-Rings PN 2081300
• 22-1/2 in. x 7-3/4 in. Winch Housing Adapter
• Pre-Existing Factory Mounting Points For No-Drill Bumper Install
• Front And Rear Bumpers Available
• Includes Front Center Section Only Corners And Brush Guards
• Pre-Drilled Holes For Tow Hooks PN 15600TW
• Requires PN 2072100 For Larger Winches

See All

• Modular Pieces Can Be Added Or Removed To Change The Look
• Bumper Provides Cutouts For Integrating Fender Flare Turn Signals
• Additional Bumper Cutouts And Mounting Tabs For OE Lights
• Narrowed Fender Flares Allow For Greater Clearance w/Larger Tires
• 3/16 in. Carbon Steel Bumper For Maximum Strength
• Textured Black Powder Coat Easily Hides Minor Scratches And Grime
• Pre-Drilled Holes For Anti-Rattle D-Rings PN 2081300
• 22-1/2 in. x 7-3/4 in. Winch Housing
• Pre-Existing Factory Mounting Points For No-Drill Bumper Install
• Front And Rear Bumpers And Fender Flares Available
• Requires Adapter PN 2072100 For Larger Winches
• Includes Center Section PN 2081004/ Corners PN 2081209

See All

• Winch And Shackle Ratings Of 12500 lbs. For Off-Road Purpose
• Standard Winch Mounting Platform Accepts Most Types Of Winches
• 1/4 in. Thick Sleeves Provide Reliable Anchoring Points
• Shackle Mounts Accept Pins Up To 7/8 in. In Diameter
• No-Drill Install Use Factory Mounting Points w/No Pump Relocation
• One-Piece Construction w/3/16 in. Thick/ All-Steel Plates
• Narrow Width And High Ground Clearance For Off-Road-Style Design
• Durable Carbide Black Powder Coat w/Rust-Resistant E-Coat Finish
• Accept Angular Brush Guard PN 2156050 For Added Winch Protection
• Center Round Cutouts Accept OE Bumper Lights
• Includes Brush Guard And Mounting Hardware
• Bull Bar May Interfere w/Forward-Facing Cameras Or Sensors

See All

• Winch And Shackle Rating Of 12500 lbs. For Off-Road Purpose
• Standard Winch Mounting Platform Accepts Most Types Of Winches
• 1/4 in. Thick Sleeves Provide Reliable Anchoring Points
• Shackle Mounts Accept Pins Up To 7/8 in. In Diameter
• No-Drill Install Use Factory Mounting Points w/No Pump Relocation
• One-Piece Construction w/3/16 in. Thick/ All-Steel Plates
• Narrow Width And High Ground Clearance For Off-Road-Style Design
• Durable Carbide Black Powder Coat w/Rust-Resistant E-Coat Finish
• Angular Brush Guard Helps Protect Winch And Adds Aggressive Look
• Center Round Cutouts Accept OE Bumper Lights
• Includes Mounting Hardware And 3/8 in. Thick Brackets
• Includes Bumper/ Brush Guard And Mounting Hardware

See All

• 2 in. Steel Tube Construction
• Bolt On Design For All Body Armor JL Front Bumpers
• Welded Adjustable Light Mount
• Two-Stage Light Texture Finish In Black

See All

• Fits All Models Of Jeep Renegade
• Made In USA

See All

• Bumper Made Of 0.1875 in. Plate Steel Construction
• Designed To Work With Factory Or Westin Hitches
• Integrated Recovery Shackle Mount Points
• Auxiliary Light Mount Points For Post Mount Square Lights
• Rock Light Mount Points On Lower Bumper Corners
• Bottom Frame Mount Prevents Bumper From Rotating
• 2 Off-Road Jack Points
• Bolt On Installation; No Drill Required
• Includes Bumper; Mounting Hardware And Install Instructions

See All

• Bumper Made Of 0.1875 in. Plate Steel Construction
• Designed To Work With Factory Or Westin Hitches
• Integrated Recovery Shackle Mount Points
• Auxiliary Light Mount Points For Post Mount Square Lights
• Rock Light Mount Points On Lower Bumper Corners
• Bottom Frame Mount Prevents Bumper From Rotating
• 2 Off-Road Jack Points
• Bolt On Installation; No Drill Required
• Includes Bumper; Mounting Hardware And Install Instructions

See All

• Bumper Made Of 0.1875 in. Plate Steel Construction
• Designed To Work With Factory Or Westin Hitches
• Integrated Recovery Shackle Mount Points
• Auxiliary Light Mount Points For Post Mount Square Lights
• Rock Light Mount Points On Lower Bumper Corners
• Bottom Frame Mount Prevents Bumper From Rotating
• 2 Off-Road Jack Points
• Bolt On Installation; No Drill Required
• Includes Bumper; Mounting Hardware And Install Instructions

See All

• 3/16-Inch Plate Steel Construction
• Features Adj. Mounting Brackets And Ribs To Protect Your Lights
• Led Light Bar Mount Accommodates A 20 in. Single Row Light Bar
• Winches Fit Inside Bumper To Allow Max Air Flow To The Radiator
• Fits Westin Or Competitor Light Bars
• 2 Side And 2 Front Off-Road Jack Points
• Corner Auxiliary Light Mount Points And Rock Light Mount Points
• Pre-Drilled Holes To Allow Install Of A Winch w/Bumper Installed
• Recovery Shackle Mounting Point Allows Easy Tow Strap Attachment
• Recommended Optional Skid Plate And Light Sold Separately
• No Drilling Required - Bolt On Installation
• Includes Bumper; Mounting Hardware And Install Instructions

See All

• Innovative 3 piece design
• Lower design winch plate allowing greater air flow
• Bolt on skid plate
• Re-uses OE fog light
• Manufactured from 3/16 cold rolled steel
• Solid D-Ring mounts
• Tow-able D-ring mounts
• Two-stage textured matte black finish
• Marine grade stainless steel hardware
• Powder coat finish with 5 year warranty
• Smittybilt Advantage Warranty - Limited Lifetime Warranty

See All

• Direct Fit
• 2-Stage Textured Black Powder Coat
• Degree Approach Angles And Raised Corners
• 3/16 in. Cold Rolled Steel
• Stinger Is 1.75 in. Tubing
• Accepts Up To Two 9 in. Lights
• Bumpers Bolt Directly To Your Vehicle
• 5-Year Limited Warranty

See All

• Manufactured From 3/16 Cold Roll Steel
• 1.75 in. 120 Wall Over Rider And Kickers
• Raised corners for better entry and exit under the most extreme conditions
• Solid Mount D-Rings - Welds On The Inside And Out
• Solid Plate Center Section That Wraps The Frame Horns And Lower Cross Member
• Built In Winch Plate To Accommodate Up To 10K Winch
• One-Piece Welded Design
• Two Stage Matte Black Finish Powder Coat Finish
• 5 Year Limited Warranty

See All

• Direct Fit
• 3/16-inch cold rolled steel
• Two-stage textured matte black finish
• 1.75 in. .120 wall kickers offers fender-to-fender coverage
• PP+TPO slip strips – the ultimate for rock crawling; provides 5/16 in. additional damage protection
• Max solid D-ring and jack point mount welded on the inside and out
• OE fog light ports ;Lights not included
• Compatible With the Alpine Front Facing Camera; HCE-C2600FD4;Sold Separately
• Smittybilt Advantage Lifetime Warranty

See All

• Direct Fit
• 2 And 4-Door Models
• Built-in winch plate to accommodate up to a 15k winch
• Manufactured from 3/16 cold rolled steel
• Solid mount d-rings - Weld on the inside and out
• Two stage textured matte black fin

See All

• High Strength And Lightweight Design
• Low Profile Winch Mount Improves Air Flow
• Integrated Lightweight 10-Gauge Steel Shell And 4-Gauge Steel Winch Tray Provides Superior Strength
• Features 4.5 in. X 10 in. Winch Mount Pattern
• Accommodates Most Winches Up To 12000 lbs Capacity
• Provides Two Recovery Points For Shackles
• Compatible With All Factory Sensors
• Hardware And Mounting Brackets Included
• E-Coated Base Coat Provides Long Lasting Corrosion Protection
• Available In Textured Black Finish

See All